Series WFR Pressure and Vacuum Sealed Feedthroughs for Bare Wires
Need advice on choosing
a Feedthrough?
Contact one of our engineers on
01895 252222 or send us an email
When multiple bare wires must pass through a pressure boundary, series WFR feedthroughs can provide an efficient seal without recourse to epoxies or other non-adjustable fixture methods.
Series WFR feedthroughs seal wires 0.5mm dia. to 3.2mm dia. (24 AWG to 8 AWG). There are four body sizes (1 to 4) having 1/8", 1/4", 1/2" and 3/4" process connections with BSPT (conical gas or DIN 2999 'R') and NPT threads along with ISO, SAE and UNF threads as shown in the Feedthrough Sizes section.
Spectite® feedthroughs are designed for ease of assembly and installation. Wires can be adjusted, removed and replaced when not under pressure or vacuum conditions.
- Seal on bare wires carrying instrumentation voltages
- Guide pressure range: Vacuum up to 700 bar
- Temperature range: -200°C to +230°C
- 316L Stainless steel wetted parts
- Choice of sealant materials
- Individual wires can be replaced without complete disassembly
- Reusable fitting - sealant and internal components replaceable
- ATEX / IECEx Approved versions to Ex II 2 GD, Ex d IIC Gb / Ex e IIC Gb, Ex ta IIIC Da available, please contact us for more details
Standard Body Style ('A' Cap) | Threaded Extension ('B' Cap) | Weld Neck | Flanges |
---|---|---|---|
Standard body style suitable for most applications. | Allows the gland to be terminated into the process as well as to a terminal head or conduit at the opposite end to the process. | Supplied without thread for permanent installation into the process by welding. Specify as 'WELD' for the thread size in the order code. |
For termination to a mating flange within the process, see Optional Flanges for details of the flanges available as standard. |
Size 1 (1/8" Thread or equivalent) | Size 2 (1/4" Thread or equivalent) | Size 3 (1/2" Thread or equivalent) |
---|---|---|
Standard Thread Sizes | Standard Thread Sizes | Standard Thread Sizes |
1/8" BSPT, 1/8" BSPP, 1/8" NPT | 1/4" BSPT, 1/4" BSPP, 1/4" NPT | 1/2" BSPT, 1/2" BSPP, 1/2" NPT |
Alternative Thread Sizes | Alternative Thread Sizes | Alternative Thread Sizes |
M8x1.0, 3/8" UNF-24 | M10x1.0, 7/16" UNF-20 | 3/8" BSPT, 3/8" BSPP, 3/8" NPT |
M10x1.0, 7/16" UNF-24 | M12x1.5, 1/2" UNF-20 | M14x1.5, 7/16" SAE-20, 9/16" UNF-18 |
M16x1.5, 1/2" SAE-20, 5/8" UNF-18 | ||
M20x1.5, 9/16" SAE-24, 3/4" UNF-16 | ||
Size 4 (3/4" Thread or equivalent) | ||
Standard Thread Sizes | ||
3/4" BSPT, 3/4" BSPP, 3/4" NPT | ||
Alternative Thread Sizes | ||
M22x1.5, 3/4" SAE-16, 7/8" UNF-14 | ||
M24x2.0, 7/8" SAE-14, 1" UNF-14 | ||
Sealant Material | Code | Colour | Example | Operating Temperature Range | Re-usable | Material definition and properties |
---|---|---|---|---|---|---|
Neoprene | N | Green | -40°C to +90°C | Yes | Synthetic rubber based on polychloroprene. The elastic properties of the polymer are enhanced by vulcanization. It is much more resistant to heat, light, oxidation, and petroleum than ordinary rubber. | |
Viton® | V | Brown | -40°C to +225°C (intermittently to +285°C) |
Yes | Fluoroelastomer. Resists hydrocarbons, corrosive chemicals and petroleum. Solvent, acid and base resistant. Low permeation rate. Mechanically robust at high temperatures. |
|
PTFE | T | White | -200°C to +250°C | Yes | Polytetrafluoroethylene. FDA approved grade to Title 21-CFR 17. 1550 and is approved to US Pharmacopoeia Class VI. Has smooth, non-wetting, hydrophobic surfaces that resist biofilm buildup and the lowest coefficient of friction of any solid material. Low thermal transfer. | |
Lava | L | Grey Stone | -200°C to +870°C | No | Natural Magnesium Silicate (Soapstone, Steatite or Rock Talc). Crushes to a powder when compressed. Hygroscopic. Porous to light gases. Unsuitable for use with liquid media and in most vacuum applications. |
Style 'A' (Supplied as standard) | Description | Style 'B' (Alternative cap) | Description |
---|---|---|---|
STANDARD |
Standard Fitting with single thread for direct mounting into process. | Standard Fitting with a Style B threaded extension for conduit/terminal head or enclosure connection. The thread form is the same as the process thread unless otherwise specified. If a different thread form is required, please specify after the 'B' in the order code, for example: If a B cap is used with a weld neck fitting, then the thread form must be specified. |
Style | Example | Part Code | Maximum Compatible Body Size |
Outside Diameter |
Thickness |
---|---|---|---|---|---|
KF FLANGE | KF16 | Size 2 | 30mm | 5.08mm | |
KF25 | Size 3 | 40mm | 5.08mm | ||
CF FLANGE | DN16CF | Size 3 | 33.8mm | 7.6mm | |
DN25CF | Size 4 | 54.0mm | 11.9mm | ||
CF Flanges are non-rotatable (fixed) type and comply with ISO3669-2017.
KF Flanges are compatible to the ISO Standard 2861 Specification.
Many other styles of flange available on request (DIN, JIS, ANSI, etc.), contact TC Ltd. for details.
Body Size, Pressure Guide and available Bore Sizes for BSPT, BSPP and NPT Threads2
Bare wires - Max 230°C rated
Body Size | No. of Wires |
Size 1 (1/8") | No. of Wires |
Size 2 (1/4") | No. of Wires |
Size 3 (1/2") | No. of Wires |
Size 4 (3/4") | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Sealant | L | N | T | V | L | N | T | V | L | N | T | V | L | T | V | ||||
Wire Size - AWG | The maximum guide pressure value (in bar) at 20°C is shown for each sealant material according to element size1. These ratings are a guide and the suitability of any of the products described herein for a particular application is entirely at the discretion of the purchaser as being the best judge for that particular application. |
||||||||||||||||||
24 | 2, 4 | 400 | 250 | 250 | 250 | 2, 4 | 400 | 250 | 250 | 250 | |||||||||
20 | |||||||||||||||||||
18 | 2, 3, 4, 6, 8 | 700 | 400 | 250 | 450 | ||||||||||||||
14 | 2, 4 | 6, 8, 12 | 550 | 250 | 350 | ||||||||||||||
8 | 2, 4 |
- The guide pressures shown for each type of sealant are at 20°C. Spectite® feedthroughs from TC Ltd. have been designed to provide an efficient seal on the elements and restrain them from moving under pressure and vacuum. It is good installation practice to provide additional, mechanical restraint to the elements when differential pressure exceeds 50% of the feedthrough guide pressure value at 20°C. With an increase in temperature, a reduction in the maximum guide pressure value can be expected. These ratings are a guide and the suitability of any of the products described herein for a particular application is entirely at the discretion of the purchaser as being the best judge for that particular application.
- Other types of process connection are available, see Feedthrough Sizes.
Size 1 (1/8" Thread or equivalent) | Size 2 (1/4" Thread or equivalent) | Size 3 (1/2" Thread or equivalent) | |
---|---|---|---|
Size 4 (3/4" Thread or equivalent) | |||